10530 Protective Covers - Commercial
Aluminum Canopies and Walkway Covers
Ships Nationwide
 SUPERIOR METAL PRODUCTS COMPANY, INC.
SUPERIOR PRODUCTS
1.01 DESCRIPTION OF WORK
Extent of canopies required is shown on the drawings. Included herein, but not
limited to, are decking, fascia/gutter, columns, anchors, supports, and flashing.
1.02 MEASUREMENTS
Verify all measurements shown on drawings by taking field measurements to insure proper fit
and attachment of all component parts.
1.03 SUBMITTALS
Provide manufacturer's shop drawings, including fabrication and installation
details.
1.04 COORDINATION
Provide necessary anchors, blockouts, flashing and other items required to be built in ample
time to avoid delays to the job.
1.05 DELIVERY & STORAGE
Deliver and store all items in protected area. Keep free of any damage.
Replace any damaged items or parts at no cost to
the Owner.
1.06 DESIGN PARAMETERS
Live load of canopies shall be no less than 20 p.s.f. Canopies
shall comply in all respects with Southern Building Code Congress International requirements for Floor, Wall and Roof systems.
1.07 ACCEPTABLE MANUFACTURER
Subject to compliance with requirements herein, provide product manufactured by
Superior Metal Products Company, Inc., Birmingham, Alabama.
1.08 PRODUCTS AND MATERIALS
Consult Superior Metal Products’ Architect Manual and
design staff for detailed specifications of materials and products.
1.09 INSTALLATION
Canopies shall be installed according to approved plans and shop drawings and the entire structure
shall be erected straight, true and plumb in accordance with standard construction procedures. All joints and connections
shall be tight and clean, and all surfaces of work left in a clean condition.
SUPERIOR QUALITY
Superior Metal Products Company, Inc. manufactures a complete line of rollformed and extruded canopies and walkway covers
10530. From the smallest door canopy to the largest walkway cover, all materials are fabricated in the company’s
Birmingham, AL facility and undergo constant inspection and quality control. Innovative mechanical assembly procedures
allow economical shipping to all points serviced by common carrier freight lines. 10530 Extruded systems are available
in both painted and anodized finishes to harmonize with the widest range of architectural designs. 10530 Rollformed
components are manufactured from only the highest quality, pre-tested and approved by independent registered structural engineers
and are in compliance with the requirements of Southern Building Code Congress International. Detailed shop drawings
bearing the seal of a Registered Engineer are provided when required, and specification, design, and installation assistance
is never more than a phone call away. 10530
Toll-Free: (877) 445-1200 Canopy Sales or Email Below
1.01 DESCRIPTION OF WORK
Extent of canopies required is shown on the drawings. Included herein, but not
limited to, are decking, fascia/gutter, columns, anchors, supports, and flashing.
1.02 MEASUREMENTS
Verify all measurements shown on drawings by taking field measurements to insure proper fit
and attachment of all component parts.
1.03 SUBMITTALS
Provide manufacturer's shop drawings, including fabrication and installation details.
1.04 COORDINATION
Provide necessary anchors, blockouts, flashing and other items required to be built in ample
time to avoid delays to the job.
1.05 DELIVERY & STORAGE
Deliver and store all items in protected area. Keep free of any damage.
Replace any damaged items or parts at no cost to
the Owner.
1.06 DESIGN PARAMETERS
Live load of canopies shall be no less than 20 p.s.f. Canopies
shall comply in all respects with Southern Building Code Congress International requirements for Floor, Wall and Roof systems.
1.07 ACCEPTABLE MANUFACTURER
Subject to compliance with requirements herein, provide product manufactured by
Superior Metal Products Company, Inc., Birmingham, Alabama.
1.08 PRODUCTS AND MATERIALS
Consult Superior Metal Products’ Architect Manual and
design staff for detailed specifications of materials and products.
1.09 INSTALLATION
Canopies shall be installed according to approved plans and shop drawings and the entire structure
shall be erected straight, true and plumb in accordance with standard construction procedures. All joints and connections
shall be tight and clean, and all surfaces of work left in a clean condition.
SUPERIOR QUALITY
Superior Metal Products Company, Inc. manufactures a complete line of rollformed and extruded canopies and walkway covers.
From the smallest door canopy to the largest walkway cover, all materials are fabricated in the company’s Birmingham,
AL facility and undergo constant inspection and quality control. Innovative mechanical assembly procedures allow economical
shipping to all points serviced by common carrier freight lines. Extruded systems are available in both painted and
anodized finishes to harmonize with the widest range of architectural designs. Rollformed components are manufactured
from only the highest quality, pre-tested and approved by independent registered structural engineers and are in compliance
with the requirements of Southern Building Code Congress International. Detailed shop drawings bearing the seal of a
Registered Engineer are provided when required, and specification, design, and installation assistance is never more than
a phone call away.
10530 Canopy-Walkway Cover brochure to download file
Contact Joe North's Canopy Sales 10530 department.
Toll-Free: (877) 445-1200 or by Email
Below
Superior Metal Products Company, Inc.
116 Citation Court
Birmingham, AL
35209-6307
Fax: (205) 945-5694
Canopy Sales 10530 Contact Email Form |
Since 1978
Superior Metal Products Company, Inc. is a manufacturer and wholesale distributor of components for Protective covers
10530 107300.
In addition, we supply architects and general contractors with exceptional products and services for their client's walkway
cover and commercial canopy requirements.
Superior's other product line includes insulated sun rooms, glass rooms, patio enclosures, screen rooms, replacement
windows, storm doors, screen doors, screen products, storm windows, and carports. Superior distributes a full line of these
residential and commercial building products to local dealers in thousands of communities across the country.
|
10530 - 10 530 - protective covers - canopies - walkway covers - aluminum - canopy
Alabama - Arizona - Arkansas - California - Colorado - Connecticut - Delaware - Florida - Georgia - Hawaii
- Idaho - Illinois
Indiana - Iowa - Kansas - Kentucky - Louisiana - Maine - Maryland - Massachusetts
- Michigan -Minnesota - Mississippi
Missouri - Montana - Nebraska - Nevada - New Hampshire - New Jersey - New Mexico
- New York - North Carolina - North Dakota
Ohio - Oklahoma - Oregon - Pennsylvania - Rhode Island - South Carolina - South Dakota
- Tennessee - Texas - Utah
Vermont - Virginia - Washington - West Virginia - Wisconsin - Wyoming
|
